Overview  

The DCS-930L , all H/W Revs all hardware revisions have reached their End of Life ("EOL") /End of Service Life ("EOS") Life-Cycle.  These products have been accused of multiple vulnerabilities.

The resources associated with these products have ceased their development and are no longer supported. For US consumers, D-Link Systems, Inc. (D-Link US), recommends retiring these products and replacing them with products that receive firmware updates. For non-US consumers, please contact your regional office for recommendations (LINK). 

Please read information and recommendations below.
 

3rd Party Report information

   
    - Reports provided: 

        残梦素雪 :: suisuzhang _at_ qq _dot_ com

   - Details:

                Public Disclosure Report: (Link will be Update at later time)

           - Exploit 1 :: The DCS-930L has buffer overflow vulnerability. The location of the vulnerability is in the TxKey parameter of /wireless.htm, and the back-end processing does not verify the length of the TxKey parameter.

The DCS-930L ended sales in the US on October 31, 2018.  The DCS-930L no longer is supported and development has ceased.  D-Link recommends retiring and replacing these cameras with supported devices. Please see recommendation below for further details.

Affected Models

Recommendation for End of Support /End of Life Products

  
From time to time, D-Link will decide that some of its products have reached End of Support ("EOS") / End of Life (“EOL”). D-Link may choose to EOS/EOL a product due to evolution of technology, market demands,  new innovations, product efficiencies based on new technologies, or the product matures over time and should be replaced by functionally superior technology.

For US Consumer  

   
If a product has reached End of Support ("EOS") / End of Life ("EOL"), there is normally no further extended support or development for it.

Typically for these products, D-Link will be unable to resolve device or firmware issues since all development and customer support has ceased. 

D-Link strongly recommends that this product be retired and cautions that any further use of this product may be a risk to devices connected to it. If US consumers continue to use these devices against D-Link's recommendation, please make sure the device has the most recent firmware, make sure you frequently update the device's unique password to access its web-configuration, and always have WIFI encryption enabled with a unique password.