Support Announcements
DCS-8300LHv2 :: H/W Rev. Ax :: F/W v1.06.01 :: Multiple RTSP/ONVIF Authentication, Buffer Overflow, and Remote Code Execution (RCE) Vulnerabilities

Overview

 

On July 13, 2023,  3rd party security research from TrendMicro ZDI reported the D-Link DCS-8300LHv2 H/W Rev. Ax :: F/W v1.06.01 having multiple security vulnerabilities.

 

 D-Link takes the issues of network security and user privacy very seriously. We have a dedicated task force and product management team on call to address evolving security issues and implement appropriate security measures.

  

Report information  

 

         - Reported by TrendMicro ZDI

  

              July 13, 2023 Report

 

                 - 1. ZDI-CAN-20072: D-Link DCS-8300LHV2 RTSP ValidateAuthorizationHeader Nonce Stack-Based Buffer Overflow Remote Code Execution Vulnerability

 

                 - 2. ZDI-CAN-21319: D-Link DCS-8300LHV2 ONVIF SetSystemDateAndTime Command Injection Remote Code Execution Vulnerability 


                 - 3. ZDI-CAN-21320: D-Link DCS-8300LHV2 RTSP ValidateAuthorizationHeader Username Stack-Based Buffer Overflow Remote Code Execution Vulnerability 


                 - 4.  ZDI-CAN-21321: D-Link DCS-8300LHV2 ONVIF Duration Stack-Based Buffer Overflow Remote Code Execution Vulnerability 


                 - 5. ZDI-CAN-21322: D-Link DCS-8300LHV2 ONVIF SetHostName Stack-Based Buffer Overflow Remote Code Execution Vulnerability 


                 - 6. ZDI-CAN-21492: D-Link DCS-8300LHV2 ONVIF Hardcoded PIN Authentication Bypass Vulnerability

   

Affected Models

 

Model Affected Version
 Region Fixed Release
Recommendation  Last Updated
DCS-8300LHv2
v1.06.01and below
Worldwide v1.07.02 (Full Qualfied)

Automatic Update or

Triggered in MyDlink App

11/30/2023


Regarding Security patch for your D-Link Devices
 
Firmware and software updates address the security vulnerabilities in affected D-Link devices. D-Link will update this continually and we strongly recommend all users to install the relevant updates.
 
Please note that this is a device beta software, beta firmware, or hot-fix release which is still undergoing final testing before its official release. The beta software, beta firmware, or hot-fix is provided on an “as is” and “as available” basis and the user assumes all risk and liability for use thereof. D-Link does not provide any warranties, whether express or implied, as to the suitability or usability of the beta firmware. D-Link will not be liable for any loss, whether such loss is direct, indirect, special or consequential, suffered by any party as a result of their use of the beta firmware.
 
As there are different hardware revisions on our products, please check this on your device before downloading the correct corresponding firmware update. The hardware revision information can usually be found on the product label on the underside of the product next to the serial number. Alternatively, they can also be found on the device web configuration.