• Home Support Forums Security Advisories Shop     English | French
Security Announcement
Announcement > SAP10393
DIR-600 / DIR-605 / DIR-605L : All H/W Revisions : End of Life (EoL) / End of Service (EoS) :: CVE-2014-1000005 & CVE-2021-40655 Reports Updated
Publication ID: SAP10393
Resolved Status: Yes
Published on: 20 May 2024 5:01 GMT
Last updated on: 24 May 2024 11:53 GMT



The DIR-600 / DIR-605 / DIR-605L are legacy devices and listed below with details in the table. All Models and all hardware revisions of  have reached their End of Life ("EOL") /End of Service Life ("EOS") Life-Cycle.  D-Link North America recommends that D-Link devices which have reached EOL/EOS, are to be retired and replaced. If you are located outside of North America, please contact your regional office for recommendations (LINK). 


As a  general policy, when products reach EOS/EOL, they can no longer be supported, and all firmware development for these products cease.  Please read information and recommendations below.

3rd Party Report information


             CVE-2014-100005: Link: CVSS 2.0 Severity (AV:N/AC:M/Au:N/C:P/I:P/A:P) Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02


                       Addressed In 2014: Link fixed firmware Here


                       Regarding DIR-605: Similar router, however not same firmware


          CVE-2021-40655: Link : CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N Information disclosure vulnerability exists in D-Link DIR-605L Hardware Version : B2 Firmware Version : 2.01MT


                       (Non-US) Firmware:  2.01MT


                       Last Known Firmware before EOL/EOS:  v2.13WWB01firmware Here



Details : TWCert Reported 05/20/2024


Affected Models


Model Region Hardware Revision End of Support Legacy Website Last Updated
DIR-600 All Regions All Series H/W Revisions 12/01/2010 Yes (Link) 05/20/2024
DIR-605 All Regions All Series H/W Revisions 02/01/2015 Yes (Link) 05/20/2024
DIR-605L All Regions All Series H/W Revisions 09/24/2019 Yes (Link) 05/20/2024


Recommendation for End-of-Support/End-of-Life Products


From time to time, D-Link will decide that some of its products have reached the End of Support ("EOS") / End of Life (“EOL”). D-Link may choose to EOS/EOL a product due to technological evolution, market demands, new innovations, product efficiencies based on new technologies, or the product maturing over time and should be replaced by functionally superior technology.


For US Consumer


If a product has reached the End of Support ("EOS") / End of Life ("EOL"), it usually does not receive further extended support or development. 

Typically, D-Link cannot resolve device or firmware issues for these products since all development and customer support have ceased.


D-Link strongly advises against the use of end-of-support products, as their continued use may pose significant risks to the devices connected to them. If US consumers choose to disregard this advice, it is crucial to ensure the device has the most recent firmware, frequently update the device's unique password for web-configuration access, and always enable WIFI encryption with a unique password.


Regarding the Security Update for Your D-Link Device


Installing firmware updates is a critical step in addressing security vulnerabilities in your D-Link devices. D-Link strongly urges all users to install the relevant updates and regularly check for further updates. After downloading the firmware update, it is essential to ALWAYS validate its success by comparing the firmware version on your product interface to the firmware update version.


Please note that beta software, beta firmware, or a hot-fix release is still undergoing rigorous testing before its official release. This ensures that the software is of the highest quality and meets our stringent standards. However, it is essential to understand that the user assumes all risk and liability for its use. D-Link does not provide any express or implied warranties regarding the suitability or usability of the beta software, beta firmware, or hot-fix release. D-Link will not be liable for any direct, indirect, special, or consequential loss suffered by any party due to their use of the beta firmware, beta software, or hit-fix release.


NOTE: Our products have different hardware revisions, so please check your device’s hardware revision before downloading the corresponding firmware update. The hardware revision can be found on the product label next to the serial number or on the device's web interface.