• Home Support Forums Security Advisories Shop     English | French
Security Announcement
Announcement > SAP10525
DGS-3130-30TS: Security Advisory on Reported Protocol and Configuration Issues
Publication ID: SAP10525
Resolved Status: Partial
Published on: 17 November 2026 3:04 GMT
Last updated on: 17 November 2026 3:04 GMT

D-Link Security Advisory

DGS-3130-30TS: Security Advisory on Reported Protocol and Configuration Issues

Interim security notice: D-Link recommends applying the immediate mitigation measures below while investigation, firmware development, and validation continue.

1. Overview

On November 2, 2026, a coordinated vulnerability report was received regarding potential security issues involving the DGS-3130-30TS managed switch. D-Link immediately initiated a comprehensive technical review.

The issues involve the D-Link Discovery Protocol (DDP) and certain firmware security configurations. If exploited by an unauthorized party with local network access, they could potentially allow unauthorized administrative actions, configuration changes, or service disruption.

D-Link security team is providing this interim advisory with immediate mitigation steps while a permanent firmware fix is being developed and validated.

2. Affected Products

Product Hardware Revision Firmware Versions Examined Status
DGS-3130-30TS B1 2.00.B014, 2.00.B034,2.04.000, 2.04.001 Under investigation

3. Recommended Customer Actions (Immediate Mitigation)

While D-Link prepares a security firmware update, customers operating the DGS-3130-30TS are strongly advised to apply the following interim workarounds immediately:

3.1 Disable D-Link Discovery Protocol (DDP)

High priority

  • Access the switch via an authorized management interface (CLI).
  • Enter Global Configuration mode and disable DDP globally.
  • Enter Interface Configuration mode for applicable physical interfaces and disable DDP.
  • Verify the status using the show DDP command and save your running configuration so the changes persist after a reboot.

3.2 Strengthen SNMP Configurations

High priority

  • Ensure that default or unnecessary SNMP community strings (such as public and private) are removed if not required. Where SNMP is operationally required, D-Link recommends migrating to SNMPv3 with authentication and encryption enabled, and restricting access to authorized management hosts only.

3.3 Restrict Management Access

High priority

  • Ensure management interfaces (Web UI, SSH, Telnet, SNMP) are never exposed directly to the public Internet.
  • Implement firewall rules and Access Control Lists (ACLs) to restrict management traffic strictly to trusted administrator IP addresses.
  • Disable any management services that are not actively used.

3.4 Monitor and Backup Configurations

Recommended priority

  • Maintain secure, off-device backups of your switch configurations.
  • Regularly review system logs and monitor for unexpected reboots, configuration alterations, or administrative account changes.

4. Remediation & Updates

D-Link is actively developing a security firmware update to further enhance system protection. This advisory will be updated with CVE identifiers and firmware download links once validation is complete.


Frequently Asked Questions (Q&A)

The following Q&A is designed to accompany the public security announcement to address common customer and technical support inquiries.

Q1: Is there a firmware patch available to fix the issues right now?

In progress. D-Link’s security team is currently investigating the full scope of the report and developing a comprehensive firmware update. Because customer security is our top priority, we published this interim announcement so you can immediately apply configuration workarounds to protect your network while the patch is being finalized and tested.

Q2: What happens to my network if I disable the D-Link Discovery Protocol (DDP)?

Disabling DDP stops the switch from responding to D-Link proprietary discovery broadcasts. Normal network switching, routing, and data traffic will not be affected. However, D-Link network management utilities (such as D-Link Nuclias series) may no longer automatically discover the switch on the local network. You will still be able to manage the switch directly via its assigned IP address (Web GUI, SSH, or Console).

Q3: I use other DGS-3130 models (e.g., DGS-3130-54TS) or other D-Link managed switches. Are they affected?

Currently, the reported findings have only been tested on the DGS-3130-30TS (H/W Rev. B1). As a precaution, our security team is further auditing other models in the DGS-3130 family and across our broader switch portfolio to see if they share the same protocol implementations. As a general security best practice, we recommend disabling DDP and removing default SNMP communities on any switch where those features are not actively required.

Q4: Can an attacker exploit the issues remotely over the Internet?

Based on current analysis, the issues require local network adjacency, i.e., the attacker must be on the same network segment as the specific switch. Direct exploitation over the Internet has not been demonstrated. As a precaution, we still recommend that management interfaces never be exposed to the public Internet.

Q5: How can I get notified when the security firmware is released?

Please bookmark this Security Announcement on the D-Link Security Advisories portal, or subscribe to D-Link’s security bulletin mailing list to receive automatic notifications when updates are published.

This advisory reflects the investigation and remediation status stated in the supplied announcement. Check the D-Link Security Advisories portal for subsequent updates.